Search results for " Foams"
showing 10 items of 18 documents
Carvacrol activated biopolymeric foam: An effective packaging system to control the development of spoilage and pathogenic bacteria on sliced pumpkin…
2021
Abstract A commercial biodegradable starch-based polymer (Mater-Bi) was activated with carvacrol to develop a biodegradable and compostable polymer to be used in food packaging. Based on previous tests, carvacrol was added at 20 % weight of foam. MB foams, with and without carvacrol, were tested for their morphological characteristics, mechanical tests and kinetics of carvacrol release under refrigerated storage conditions. Carvacrol slightly increased the porosity of the foams, induced a reduction of the compressive elastic modulus (Ecom) of foamed MB from 6 to ∼ 3.4 MPa and a decrease of the tensile elastic modulus from ∼70 MPa to ∼16.5 MPa. Carvacrol release from the foam at 4 °C was alm…
From Norway Spruce Bark to Carbon Foams : Characterization, and Applications
2020
Fresh bark from spruce Picea abies was milled and extracted with hot water. The extracts were purified in a number of steps in order to get tannin-extracts pure enough to prepare tannin-based carbon foams. The chemical composition of the extracts were analyzed. The foams were maturated and thermally treated to obtain desired properties, such as specific surface area, porosity, and compressive strength. It was possible to produce carbon foams even if they contained carbohydrate impurities. Differences in the properties of the carbon foams such as compressive strength, specific surface areas, and pore size distributions might be related to the compositions of the extracts. The foams were fina…
Deformative Properties of Monotropic Plastic Foams with a Pronounced Strut-Like Strukture
1996
Disertācija angļu valodā, kopsavilkums arī latviešu un vācu valodā.
Impact of a new carrageenan-based vaginal microbicide in a female population with genital HPV-infection: First experimental results
2019
OBJECTIVE: The objective of this study was to assess safety, satisfaction, and anti- viral effect of a new carrageenan-based vaginal microbicide in a population of fertile female patients with genital human papillomavirus (HPV) infection. PATIENTS AND METHODS: Forty healthy and sexually active women aged 18-45 years with genital HPV infection were enrolled. Each subject was treated with a gel formulated with 0.02% carrageenan and Propionibacterium extract (CGP) (Carvir, Depofarma SpA, Mogliano Veneto, Treviso, Italy). The subjects were evaluated at baseline, after the I cycle of therapy and after the II cycle. At final status, treatment acceptability and satisfaction were evaluated using a …
Conversion of furfural to 2-methylfuran over CuNi catalysts supported on biobased carbon foams
2021
In this study, carbon foams prepared from the by-products of the Finnish forest industry, such as tannic acid and pine bark extracts, were examined as supports for 5/5% Cu/Ni catalysts in the hydrotreatment of furfural to 2-methylfuran (MF). Experiments were conducted in a batch reactor at 503 K and 40 bar H2. Prior to metal impregnation, the carbon foam from tannic acid was activated with steam (S1), and the carbon foam from pine bark extracts was activated with ZnCl2 (S2) and washed with acids (HNO3 or H2SO4). For comparison, a spruce-based activated carbon (AC) catalyst and two commercial AC catalysts as references were investigated. Compressive strength of the foam S2 was 30 times great…
Quantum geometry and microscopic black hole entropy
2006
9 pages, 6 figures.-- PACS nrs.: 04.60.Pp, 04.70.Dy.-- ISI Article Identifier: 000242448900013.-- Published online on Nov 28, 2006.
Numerical model for the shear rheology of two-dimensional wet foams with deformable bubbles
2014
Shearing of two-dimensional wet foam is simulated using an introduced numerical model, and results are compared to those of experiments. This model features realistically deformable bubbles, which distinguishes it from previously used models for wet foam. The internal bubble dynamics and their contact interactions are also separated in the model, making it possible to investigate the effects of the related microscale properties of the model on the macroscale phenomena. Validity of model assumptions was proved here by agreement between the simulated and measured Herschel-Bulkley rheology, and shear-induced relaxation times. This model also suggests a relationship between the shear stress and…
Physical activation and characterization of tannin-based foams enforced with boric acid and zinc chloride
2019
In this study, tannin-furanic-based foams enforced with H3BO3 and ZnCl2 are investigated, as well as their properties such as mechanical strength, specific surface area, and pore size distribution. From an industrial point of view, the aforementioned properties of these foams play a key role when used as catalyst, adsorbent, or gas storing materials. Therefore, this study aims to prove that such enforced tannin-furanic foams are promising materials for these types of applications. According to the results, materials that are up to five times stronger can be achieved by carbonizing the foams in comparison to maturing them. With physical activation, it was possible to obtain a specific surfac…
Mechanical properties of rigid polyurethane foams at room and cryogenic temperatures
2011
Studies on the effect of the foams’ polymeric matrix’ properties on the tension and compression properties of pour rigid polyurethane (PUR) foams, apparent core density 65—70 kg/m3, at 296 and 77 K were carried out. PUR foams were produced by the hand mixing method from polyol systems that comprised polyether, polyester polyols, and chain extenders. To produce PUR foams, crude MDI was used, and Solkane 365 mfc/227 ea was used as a blowing agent. The molecular weight per branching unit (Mc) of the polymeric matrix of PUR foams was varied in the range 300—1150. Cohesion energy densities of the blocks forming the polymeric matrix were calculated. The effect of Mc on the formation of hydrogen …
Estimation of the effective diffusivity of blowing agents in closed-cell low-density polyurethane foams based on thermal aging data
2021
Abstract Low-density closed-cell polyurethane (PU) foams are applied as thermal insulation materials due to their low thermal conductivity imparted by that of the physical blowing agent (PBA) used in foam production. However, foam conductivity tends to gradually increase with time, primarily due to changes in the gas composition in foam cells brought about by gas diffusion. To enable predicting the variation of conductivity during the service life of foam insulation, gas diffusivities are usually determined by measuring the gas composition in foams at different aging times. This study considers an alternative approach of estimating the effective diffusivities of gases in PU foams, which is …